Office Mob: +8618002480485
Office Tel: +86-024-31140175
Office Fax: +86-024-22845391
- Aug 29, 2017 -
Woodworking CNC engraving machine spindle suddenly does not turn, how to do? Below for you to introduce several solutions:
1, this method is the simplest method, that is, reinstall the computer program can. Reinstall the program before you click on the parameters to remember, reinstall the program after the parameters restore.
2, check whether the driver board burning, this case according to the woodworking CNC engraving machine inside the drive light to judge, usually green light is normal, red light is not normal.
Short circuit 3, check the engraving machine spindle is short circuited; (this can be found in the axis of rotation of the spindle of the thread plug, and then take a standard to ensure the normal line, with a multimeter, a head connected to the line, a power distribution cabinet related outlet to measure resistance).
4. Check whether the control board of the engraving machine has any problems. (this method is more troublesome. You need to find a friend with the same engraving machine near you, and use his computer to control your machine to test it. )